Drive Mad Level 112 Walkthrough - Broken Bridge Guide

Drive Mad level 112, called Broken Bridge, is a medium level built around timing, momentum, and a controlled fall through a collapsing obstacle. As part of the full Drive Mad levels progression, this stage looks like a normal bridge crossing at first, but the bridge is meant to break under the truck. The real challenge is to use that collapse to guide the vehicle into the narrow lower passage instead of trying to stay on top. If you push forward too early, the nose crashes into the upper edge of the tunnel. If you wait too long, the truck drops too deep and misses the entrance completely. The level becomes much more reliable once you treat the bridge break as the intended route rather than a mistake.

Why Level 112 Feels Hard

This Drive Mad level feels awkward because success depends on a very specific falling angle instead of a normal driving line. The truck has to arrive on the weak bridge with enough control to stay balanced as the wood bends downward. During that collapse, the body needs to remain almost upright relative to the bridge so the nose can line up with the lower entrance. A small timing mistake changes everything. Early throttle sends the front into the ceiling edge, while late throttle makes the truck sink below the entry window.

Step-by-Step Walkthrough for Drive Mad Level 112

Step 1: Drive onto the weak bridge and let the collapse begin near the far side

Move onto the wooden bridge at a steady pace instead of charging recklessly. When the truck reaches roughly the last quarter of the bridge, the platform starts to give way. At that point, do not panic and do not try to force a jump. Let the front rise naturally so the truck begins to stand in a near-upright posture as the bridge breaks beneath it.

Step 2: Stay tall while the broken bridge bends downward

As the bridge folds, follow the drop and try to keep the truck nearly vertical relative to the falling boards. This is the most important setup in the whole level. You are not trying to accelerate through the collapse. You are trying to preserve the body angle that will let the nose meet the tunnel opening from above.

Step 3: Press forward when the nose falls just below the tunnel's top edge

Watch the front of the truck carefully as it descends. The correct input window appears when the nose slips just a little below the upper lip of the lower passage. That is the moment to hold forward decisively. The extra push sends the truck along the falling angle and into the narrow tunnel. Once inside, level the truck out and simply drive onto the checkered finish.

Best Cue for Consistent Clears

Let the bridge fold, then drive into the opening.

Why This Method Works

This method works because it uses the bridge collapse to create the exact entry angle that the lower tunnel requires. A controlled approach lets the truck stay balanced as the wooden bridge gives way. Keeping the body upright during the fall positions the nose near the entrance line instead of below it or into the ceiling. Once the nose clears the top edge, a well-timed forward input converts the falling motion into a clean slide into the passage. The level becomes much more consistent when you separate it into three jobs: trigger the collapse cleanly, preserve the angle, then commit to the entry at the right height.

Common Mistakes in Drive Mad Level 112

• Rushing onto the bridge and losing control before the collapse
• Pressing forward too early and hitting the upper edge of the tunnel
• Waiting too long and falling below the entrance
• Letting the truck flatten out instead of staying upright during the drop
• Overcorrecting after entry and flipping before the finish

Fast Summary

• Drive steadily onto the weak bridge
• Let the bridge break near the later section
• Keep the truck nearly upright during the collapse
• Press forward when the nose drops just below the tunnel lip
• Level out inside the passage and drive to the finish

FAQ